Objet500 User Guide
6. If the build tray is not clear, click No in the following dialog box.
7. Carefully inspect the test paper to see if there are missing lines.
DOC-07027 Rev. I
Figure 6-36 Pattern Test confirmation
Figure 6-37 Build tray (Z) level adjustment
The build tray is lowered to prevent damage to models on the tray.
The printer prints a series of lines on the test paper (see next figure).
Figure 6-38 Sample Pattern Test
Too many missing lines, especially if they are in the same area, indicates that
the quality of printing when producing models will be poor. If this is the case,
see "Improving Print Quality" on the next page.
Note: Acceptable model quality is subjective, and depends on the type and
scale (size) of the models produced. As a rule, however, more than 10
missing lines in one area of a column is considered unacceptable.
6 Operating and Maintaining the Printer
6-36