Table of Contents
Advertisement
Freezing Model
Orientation
Display Options
Viewing
Objects
DOC08010 Rev. A (DRAFT 1)
If you manipulate an object on the build tray, you can freeze its orientation
so that it does not change when you position it automatically (see
"Automatic Placement" on page 26).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings ribbon, in the Manipulate group, or on the Model
Toolbar, click
To unfreeze an object:
Select the object and click
From the View menu, you can change the way objects are displayed. The
default method for displaying models on the build tray is as solid
("shaded") objects.
Figure 5-48: Tray and model displayed in Shaded view
The other display options are WireFrame and Points.
To display the build tray in WireFrame view:
From the View menu, select
Figure 5-49: Tray and model displayed in WireFrame view
To revert to the shaded view:
From the View menu, select
.
(to de select it).
WireFrame
.
Shaded
Stratasys P750K User Guide
.
5–37
Advertisement
Table of Contents
