Objet500 User Guide
DOC-07027 Rev. I
saving VRML files in a CAD program, a bmp file of the assembly should be
saved.
You can open several stl files (and VRML files) to place several models on the
build tray. If you select multiple stl files that make up an assembly, you can
select all or some of the parts. To print the entire model, select all of an
assembly's component stl files, and select the Assembly check box. This
positions the parts as a complete, integrated model instead of as independent
parts. The effects of selecting the Assembly check box—in both the model
tree and the build tray display—are shown in the following figures.
Figure 5-8 Assembly check box selected—stl files are placed as an
assembly
Figure 5-9 Assembly check box not selected—stl files are placed as parts
The Model Settings ribbon is displayed when objects are placed on the build
tray.
5 Using Objet Studio
5-12