Local Bus Interrupter Enable Register (Bits 8-15) - Motorola MVME162FX Programmer's Reference Manual

VMEchip2

Local Bus Interrupter Enable Register (bits 8-15)

2
ADR/SIZ
BIT
NAME
OPER
RESET
2-86
15 14 13
ESW7 ESW6 ESW5
R/W R/W R/W
0 PSL 0 PSL 0 PSL
This is the local bus interrupter enable register. When an enable bit
is high, the corresponding interrupt is enabled. When an enable bit
is low, the corresponding interrupt is disabled. The enable bit does
not clear edge-sensitive interrupts or prevent the flip flop from
being set. If necessary, edge-sensitive interrupters should be
cleared to remove any old interrupts and then enabled.
ESW0 Enable software 0 interrupt
Enable software 1 interrupt
ESW1
Enable software 2 interrupt
ESW2
ESW3 Enable software 3 interrupt
ESW4 Enable software 4 interrupt
ESW5 Enable software 5 interrupt
ESW6 Enable software 6 interrupt
ESW7 Enable software 7 interrupt
$FFF4006C (8 bits of 32)
12 11
ESW4 ESW3
R/W R/W
0 PSL 0 PSL
10 9 8
ESW2 ESW1 ESW0
R/W R/W R/W
0 PSL 0 PSL 0 PSL