Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Controlling Modem Auto-Answer
This command is used to control the auto answer capability of the dial modem to on or off.
The modem answers after a certain number of rings if auto answer capability is turned On.
Otherwise, modem auto-answer is disabled.
1.
From the Diagnostic menu, use the
Enable Modem Auto-Answer
Figure 5-6: Diagnostics Screen—Enable Modem Auto Answer
The Select Enable Modem Auto Answer Screen appears (see Figure 5-7).
May 1998
to position the cursor to the left of the listing
<tab>
and press:
(see Figure 5-6).
<Return>
6880494G55-O
Diagnostic Commands
5-7
Advertisement
Table of Contents
