Konica Minolta bizhub 500 Service Manual page 609

12. JAM CODE
Classification Jam code
DF J-6001
J-6002
J-6101
J-6102
J-6103
J-6104
J-6105
J-6106
J-6107
276
Cause
The DF open/close switch (SW3)
turns OFF while in the DF operation.
The cover open/close sensor (PS7)
turns OFF while in the DF operation.
While in the single sided mode, the
original feed sensor (PS6) does not
turn ON within a specified period of
time after the original feed motor (M1)
turns ON.
When feeding the first original in the
mode other than the single sided
mode, the original feed sensor (PS6)
does not turn ON within a specified
period of time after the original feed
motor (M1) turns ON.
When feeding the second original in
the mode other than the single sided
mode, the original feed sensor (PS6)
does not turn ON within a specified
period of time after the original feed
motor (M1) turns ON.
When feeding the third original in the
mode other than the single sided
mode, the original feed sensor (PS6)
does not turn ON within a specified
period of time after the original feed
motor (M1) turns ON.
While in the single sided mode, the
original feed sensor (PS6) does not
turn OFF within a specified period of
time after the PS6 turns ON.
When feeding the first original in the
mode other than the single sided
mode, the original feed sensor (PS6)
does not turn OFF within a specified
period of time after the PS6 turns ON.
When feeding the second original in
the mode other than the single sided
mode, the original feed sensor (PS6)
does not turn OFF within a specified
period of time after the PS6 turns ON.
Field Service Ver1.0 Feb.2006
Resulting Correction
operation
The DF stops Open the open/close
immediately. If cover and remove
there is paper jammed paper if any.
being trans-
ferred or having
been trans-
ferred, the main
body completes
the paper exit
before stopping
operations.