Konica Minolta bizhub 500 Service Manual page 464

Field Service Ver1.0 Feb.2006
[2] [1]
[3] [2]
[2]
[3]
50gaf2c067na
[1]
50gaf2c068na
[1]
50gaf2c069na
Note
• When removing the ribbon cable [1], be sure
to bring down the lock lever [3] of the connec-
tor [2] in the arrow-marked direction to
release the lock and pull out the ribbon cable.
• When installing the ribbon cable [1], be sure
to check to see if the lock lever [2] is
released. And insert deep it into connector [3]
securely while taking note that the conductor
side of the ribbon cable comes to the oppo-
site side of the lock lever.
• After that, bring the lock lever [1] back to its
original position and lock the ribbon cable
[2].
6. OTHERS
131