Replacing The Drum - Konica Minolta bizhub 500 Service Manual

Hide thumbs Also See for bizhub 500:

Table of Contents

3. PERIODIC CHECK

Replacing the drum

• Be sure to avoid touching the drum and the cleaning blade with bare hands, and also be careful

not to damage them.

• When storing the drum, be sure to store it in the dark place with a drum cover attached.

• When installing the drum and the cleaning blade, be sure to apply setting powder to the circumfer-

ence of the drum and the cleaning blade, regardless of these parts being new or used ones.

• When setting powder is applied to the drum, be sure to conduct the following operations before

installing the drum unit to the main body.

1) With the charging corona unit removed, rotate the drum one full turn (to prevent setting powder

from splashing onto the charging corona unit and the image from getting defective.)

2) When installing a new drum, be sure to reset the drum counter in the service mode. Failing to

reset it may result in image fogging and toner splashing.

Field Service Ver1.0 Feb.2006

Table of Contents