Konica Minolta bizhub 500 Service Manual page 881

3. MECHANICAL ADJUSTMENT
(7) Paper exit roller release mode
Output check switch /1 : ON
Output check switch /2 : ON
(8) Intermediate conveyance roller release mode
Output check switch /1 : ON
Output check switch /2 : ON
(9) Main tray operation mode
Output check switch /1 : ON
Output check switch /2 : ON
(10) Punch hole operation mode
Output check switch /1 : ON
Output check switch /1 : ON
Output check switch /2 : ON
22
The paper exit roller is in the pressure/release opera-
tion
The intermediate conveyance roller is pressured.
The intermediate conveyance roller is released.
The main tray goes up until the light of the main tray
upper limit LED (LED19) is blocked.
The main tray goes down until the main tray upper
limit sensor (PS19) receives the light.
The punch motor (M11) drives.
The punch clutch (CL1) turns ON.
The punch motor (M11) stops.
Field Service Ver1.0 Feb.2006