Konica Minolta bizhub 500 Service Manual page 380

Field Service Ver1.0 Feb.2006
[2]
[5]
[4]
[6]
[3]
[1]
[8] [7]
[3]
50gaf2c161na
[4] [1]
[2]
50gaf2c162na
7.
Remove the C-ring [1] and then remove the bear-
ing [2].
8.
Detach the hook [4] of the spring [3] from the
oblong hole [5].
9.
Remove the bearing [6] and then remove the
paper feed roller unit [7].
Note
• When attaching the spring, be sure to put the
hook into the oblong hole (not into the round
hole [8]).
10. Remove the E-ring [1] and then remove the bear-
ing [2].
11.
Remove the bearing [3] and then remove the feed
roller assy [4].
3. PERIODIC CHECK
47