Konica Minolta bizhub 500 Service Manual page 539

10. SERVICE MODE
10.7.6 HDD Format (Memory/HDD Adjustment)
Formats HDD.
Note
• When formatting HDD, all the data stored in HDD gets lost and becomes unrecoverable.
A. Procedure
1.
"Service Mode screen"
Press [State Confirmation].
2.
"State Confirmation screen"
Press [Memory/HDD Adjustment].
3.
Press [HDD Format] from the menu.
The screen for confirmation is display.
4.
Press [Yes].
When formatting is executed and completed, a message "The formatting of HDD is completed" is dis-
played.
5.
Turn OFF the power switch (SW2) and the main power switch (SW1) in this order.
6.
After waiting for 10 seconds or more, turn ON SW1 and SW2 in this order.
Note
• Turning ON SW1 not waiting for 10 seconds or more after turning it OFF may damage HDD. Be
sure to turn ON SW1 10 seconds or more after turning it OFF.
10.7.7 Adj. Data Table
Displays the adjustment data set for this machine.
A. Procedure
1.
"Service Mode screen"
Press [State Confirmation].
2.
"State Confirmation screen"
Press [Adj. Data Table].
3.
"Adj. Data Table screen"
Press [ ↑ ] or [ ↓ ] to display necessary items.
4. Pressing [NVRAM Value] switches the display into the step number display set and pressing also [Adjust
Value] switches the display into the adjustment value (the value of 1 step x the number of steps).
5. Press [OK].
206
Field Service Ver1.0 Feb.2006