Conveyance Control - Konica Minolta bizhub 500 Service Manual

Theory of Operation Ver1.0 Feb.2006
17.3.2

Conveyance control

When printing two or more sheets of paper in the double sided print mode, the conveyance control in ADU var-
ies according to the length of paper in the sub scan direction. The following 3 control methods are provided for
the conveyance control.
Conveyance control
1 sheet self-contained double sided print
2 sheets self-contained double sided print
3 sheets self-contained double sided print
A. 1 sheet self-contained double sided print operation
Note
• A figure in the illustration (shown in the square) represents the page number.
2
B4 (364 mm) to Ledger (431.8 mm)
Letter (215.9 mm) to B4 (364 mm)
B5 (182 mm) to Letter (215.9 mm)
2
50gat2c058na
50gat2c059na
Length of applicable paper in the sub scan direction
1.
With the 1st sheet of paper fed, the image of the
2nd page (the back side of the 1st sheet of paper
when the original is double sided) is printed.
2. The 1st sheet of paper is conveyed to the paper
reverse/exit section, and then conveyed to ADU
after being turned over.
17. ADU SECTION
63