Konica Minolta bizhub 500 Service Manual page 884

Field Service Ver1.0 Feb.2006
[6]
[4]
[3]
4.
[5] [2]
5.
6.
7.
4521f3c005na
3. MECHANICAL ADJUSTMENT
Open the upper door [2].
Loosen the screw [3] and move the handle [4] in
the arrow-marked direction [5] to adjust the posi-
tion of the punch unit [6].
Repeat steps 1 and 2 and check the punch holes
to see if the discrepancy "A" is 2 mm or less.
When "A" is in excess of 2 mm, repeat steps 3 to
6 until "A" gets inside 2 mm.
25