Konica Minolta bizhub 500 Service Manual page 441

5. FIRMWARE VERSION UP
Step
6 Press the [FileCheck] to check if the data to be used has any problem.
7 Place the main body in the ISW standby condition.
8 Check to see if "Please execute the data transfer. The data reading is begun." is displayed.
9 When a connection is made with a USB cable, connect the USB cable [2] to the USB connector [1] of
the main body.
[2]
Note
• Be sure to press the start key before connecting the USB cable. When connecting the
USB cable before the start key is pressed, the main body is put in the stand-by position
for the print data with no ISW data accepted.
10 Click [FileSend] of the ISWTrns.
108
Field Service Ver1.0 Feb.2006
Operation
[1]
50gaf2c179na