Konica Minolta bizhub 500 Service Manual page 99

17. ADU SECTION
2
1
4
3
2
1
70
8
3 4
6
50gat2c079na
8
10
6
50gat2c080na
Theory of Operation Ver1.0 Feb.2006
8.
The 2nd sheet of paper is fed again and the image
of the 3rd page (the front side of the 2nd sheet of
paper when the original is double sided) is printed.
The 4th sheet of paper is turned over to be sent to
ADU with the 3rd sheet of paper standing by at
the conveyance roller /3. In this way, the 5th sheet
of paper is fed.
9. While the 2nd sheet of paper is being exited, the
image of the 10th page (the back side of the 5th
sheet of paper when the original is double sided)
is printed on the 5th sheet of paper. At this time,
since the 3rd sheet of paper is standing by at the
conveyance roller /3, the 4th sheet of paper stops
when the interval between this sheet and the 3rd
sheet of paper comes to the prescribed distance.
10. After this, the procedure of steps 7 to 9 is
repeated.