Konica Minolta bizhub 500 Service Manual page 599

10. SERVICE MODE
10.16.3 CE Password
Set a password to enter the service mode.
Note
• Be sure to avoid using as a password the name and the birth day that can be easily suspected by
other people.
• CE must not leak the password to other people.
• The CE password is valid when the CE authentication function is valid.
(See P.267)
A. Procedure
1.
"Enhanced Security screen"
Press [CE Password].
2.
"CE Password Setting screen"
Enter 8 digits of a password currently set in the alphanumeric characters and press [END]. "92729272" is
set for default.
3.
Enter 8 digits of a new password in the alphanumeric characters and press [END].
4.
Enter 8 digits of the re-entered password in the alphanumeric characters and press [END] to make the
setting valid with [Enhanced Security screen] displayed.
If you want to make the entered setting invalid, press [Cancel].
10.16.4 Administrator Password
Set a password to enter the administrator setting of the set-up menu.
The administrator password can also be set from the administrator setting of the set-up menu.
Note
• Be sure to avoid using as a password the name and the birth day that can be easily suspected by
other people.
A. Procedure
1.
"Enhanced Security screen"
Press [Administrator Password].
2.
"Administrator Password Setting screen"
Enter 8 digits of a new password in the alphanumeric characters and press [END]. "12345678" is set for
default.
3.
Enter 8 digits of the re-entered password in the alphanumeric characters and press [END] to make the
setting valid with [Enhanced Security screen] displayed.
If you want to make the entered setting invalid, press [Cancel].
266
Field Service Ver1.0 Feb.2006