Adjustment Of The Main Gate Solenoid (Sd2) - Konica Minolta bizhub 500 Service Manual

Field Service Ver1.0 Feb.2006
3.3.2

Adjustment of the main gate solenoid (SD2)

A. Procedure
[1]
[4]
[2]
[3]
4521f3c007na
3. MECHANICAL ADJUSTMENT
1.
Remove the upper cover.
(See P.6)
2.
Remove the front cover /Up.
(See P.8)
3.
Loosen 2 screws [1].
4.
Move the main gate solenoid (SD2) [2] and tighten
the 2 screws [1] when the length of "A" [3] comes
to the specified value.
Note
• With the plunger of SD2 pressed in the arrow-
marked direction [4] in advance, be sure to
adjust the clearance with no play.
Specified value "A" = 3.6 mm
27