Konica Minolta bizhub 500 Service Manual page 810

Field Service Ver1.0 Feb.2006
[6]
[5] [7]
[4] [2]
[8]
[2]
[4] [3] [1]
16aaf2c003na
[3]
[1]
16aaf2c004na
4.
Remove the C-clip [1] and then remove the actua-
tor [2].
5.
Remove the C-clip [3] and then remove the bear-
ing [4].
6.
Pull out the shaft [5] in the arrow-marked direction
[6] and remove the feed roller [7].
7. Remove the feed rubber [2] from the paper feed
roller [1].
Note
• Be sure to install the feed rubber [2] so that
the paint mark [3] comes in the opposite
direction of the gear [4].
• When setting the feed rubber, apply alcohol
on the inside of the feed rubber. By doing so,
the feed rubber can be set more easily.
2. PERIODIC CHECK
5