Konica Minolta bizhub 500 Service Manual page 438

Field Service Ver1.0 Feb.2006
(2) When using the USB cable
Preparations are made of the following when a connection is made.
• PC which firmware have been copied.
• UBS cable
1) Procedure
Step
1 Connect the UBS cable [2] to the USB port [1] of the PC.
[1]
Note
• Be sure to connect the UBS cable to the ISW connector of the main body after the set-
ting is made in the following condition.
Operation
5. FIRMWARE VERSION UP
[2]
50gaf2c178na
105