Konica Minolta bizhub 500 Service Manual page 357

3. PERIODIC CHECK
[1]
[1] [2]
[2]
24
[1]
[4] [3] [2]
50gaf2c021na
[3]
50gaf2c022na
[1]
[3]
50gaf2c023na
Field Service Ver1.0 Feb.2006
6.
Remove the 6 screws [1] and then remove the
write cover [2].
Note
• When installing the write cover, be sure to set
the projections [3] at 3 places into each of the
holes [4] of the frame.
7. Remove the 2 screws [1].
8.
Remove the connector [2] and then remove the
drum cooling fan assy [3].
9.
Remove the screws [1], 1 each, and then remove
the 2 write section mounting member assy's [2].
Note
• When installing the write section mounting
member assy [2], be sure to install it so that
the spring [3] gets straight.