Stacker Paddle Drive Clutch Assy - Konica Minolta bizhub 500 Service Manual

3. OTHER
3.3.13

Stacker Paddle Drive Clutch Assy

[1]
[2]
[1]
[5]
[7]
[6]
16
A. Removal Procedure
1. Remove the Lift Tray.
(See P.13)
2. Remove the Conveyance Unit.
(See P.13)
3. Remove the Conveyance Upper Cover.
(See P.9)
4. Remove the E-ring [1].
4349f2c026na
5. Loosen two hexagonal socket head
screws [2], and remove the Stacker
Paddle Drive Clutch Assy [3].
[3]
4349f2c027na
B. Reinstallation Procedure
1. Check that the 2-mm hole [2] of the
[3]
stacker paddle drive shaft [1] and the
cutout of the frame [3] are aligned and
[2]
install the Stacker Paddle Drive Clutch
Assy [4].
2. Refer to the figure and check the paddle
position [5].
3. Hook the Solenoid Flapper [7] to the
claw [6] of the Stacker Paddle Drive
Clutch Assy [4].
4. Attach the E-ring and reinstall the
Stacker Paddle Drive Clutch Assy.
5. Adjust the spacing between the E-ring
and the Stacker Paddle Drive Clutch
Assy to 0.2 mm and tighten two hexago-
nal socket head screws.
[4]
4349f2c028na
Field Service Ver. 1.0 Feb. 2006