Konica Minolta bizhub 500 Service Manual page 507

10. SERVICE MODE
10.5.2 Tel/Fax Number
Sets the telephone number and the fax number of the service station that are displayed on the screen when a
service call occurs.
These telephone and fax numbers are also displayed as the service center contact of the basic screen help of
the user screen.
A. Procedure
1.
"Service Mode screen"
Press [System 1].
2.
"System Input screen"
Press [Tel/Fax Number].
3.
"Service Telephone/Fax Number Setting"
Press [TEL] or [FAX].
4.
Enter the telephone number or fax number through the copy count setting key.
5.
When setting both the telephone number and the fax number, repeat steps 3 to 4.
6.
Press [END].
Note
• Pressing the Clear key erases all the figures of the items selected.
10.5.3 Serial Number
Sets and displays the serial numbers of the main body and the optional devices.
Caution
• Be absolutely sure not to change the serial numbers of the main body set when installing them.
Otherwise, a fusing temperature abnormality may result.
A. Procedure
1.
"Service Mode screen"
Press [System 1].
2.
"System Input screen"
Press [Serial Number].
A serial number that is registered is displayed.
3.
"Serial Number Input screen"
Press a device to be registered: [Printer (Body)], [Option Tray], [LCT], [Finisher], [Fax #1], [Fax #2], [Punch
Kit], [Suddle Kit], [Mail Bin Kit].
4.
"Soft Keyboard screen"
Enter a serial number through the alphabet and numeric keys.
5.
Press [OK].
Press [Clear] if you want to make the settings entered invalid.
6.
Repeat steps 3 to 5 to enter the serial number of each device.
7.
Press [OK].
174
Field Service Ver1.0 Feb.2006