Konica Minolta bizhub 500 Service Manual page 569

10. SERVICE MODE
Error code
0015 Status Error
(During modem operation is being confirmed)
0016 Status Error (During receiving)
0017 Status Error
(During line is being shut down)
0018 Machine ID has already been registered
(Request telegram 2 (SET-UP) comes from the main
unit that has already registered Machine ID.)
0019 Center ID Error
(Center ID of the host is not identical with the one of
start request telegram.)
001A Device ID inconsistency
(Device ID of the host is not identical with the one of
start request telegram.)
001B Device ID Unregistered
(Request telegram 2 (Constant data transmitting,
Emergency call) comes from the main unit that has
not registered Machine ID yet.)
001C Grammar Error
(Received response telegram is unregulated format.)
001D Impossible to change (Unchangeable items)
(Host requests to change the setting of items which
are not allowed to change.)
001E Impossible to change (During printing)
(Setting cannot be changed because the setting
change is made during the machine is printing or
starts printing.)
001F Impossible to change (Unread items)
(The host tries to make writing on the items the cur-
rent value has not been read.)
0020 Timeout of Telegram Delivery
(At waiting mode of telegram delivery the machine
fails to receive the telegram in a given time.)
0021 Telegram Size Over
(The machine receives the telegram whose size
exceeds the specification.)
0022 Transmitting Phase Response NG
(Transmitting phase response MSG is not appropri-
ate.)
0023 Timeout of Transmitting Phase Response MSG
(Transmitting phase response MSG is timeout.)
236
Error
Field Service Ver1.0 Feb.2006
Solution
• Contact responsible person of
KONICA MINOLTA.
• Contact responsible person of
KONICA MINOLTA.
• Contact responsible person of
KONICA MINOLTA.
• Set the initial registrations again
for all including the host side.
• Check Center ID setting of the
main unit side.
• Check Center ID setting of the
main unit side.
• Check Device ID setting of the
main unit side.
• Check the setting of the host
side.
• Check Device ID setting of the
main unit side.
• Check the setting of the host
side.
• Contact responsible person of
KONICA MINOLTA.
• Contact responsible person of
KONICA MINOLTA.
• Try again when the machine is not
printing.
• Contact responsible person of
KONICA MINOLTA.
• Try communication again.
• Contact responsible person of
KONICA MINOLTA.
• Contact responsible person of
KONICA MINOLTA.
• Contact responsible person of
KONICA MINOLTA.