Konica Minolta bizhub 500 Service Manual page 918

Field Service Ver. 1.0 Feb. 2006
[21]
[22]
[25]
[27]
[31]
[32]
[20]
[24]
[23]
4511f2c054na
[26]
4511f2c055na
[29]
[28]
4511f2c056na
[30]
[34]
[33]
4511f2c057na
10. Remove the screw [20].
11. Remove two C-rings [21], and remove
the Folding Roller A [22], B [23] and C
[24].
12. Remove the gear [25] of Folding Roller
/Lt, and remove the Lower Guide Plate
[26].
NOTE
• When installing the gear [27] to the
Lower Guide Plate [28], insert the gear
[27] at an angle and take care not to
break the claws [29].
• Install the Lower Guide Plate as shown
on the left.
13. Remove the screw [30].
14. Remove two C-rings [31], and remove
the Folding Roller A [32], B [33] and C
[34].
3. OTHER
19