19. REVERSE/EXIT SECTION
19.3 Operation
19.3.1
Conveyance control
A. Reverse gate
The reverse gate is driven by the ON/OFF of the reverse solenoid (SD3). Paper conveyed from the fusing section
is switched by the reverse gate between the paper exit section and the reverse section.
B. Conveyance path
(1) Paper exit path
The reverse solenoid (SD3) is normally turned OFF and the reverse gate [1] is held in the position in which it
blocks the conveyance path to the reverse roller [4]. In this manner, paper conveyed from the fusing exit roller
(decurler roller) [2] is guided to the main body paper exit roller [3] along the internal form of the reverse gate to be
exited.
[1]
Reverse gate
[2]
Fusing exit roller (decurler roller)
78
[4]
[3]
[2]
Theory of Operation Ver1.0 Feb.2006
[1]
[3]
Main body paper exit roller
[4]
Reverse roller
50gat2c085na