Replacing The Feed Roller/Pick-Up Roller (Tray 2) - Konica Minolta bizhub 500 Service Manual

Field Service Ver1.0 Feb.2006
3.12.3

Replacing the feed roller/pick-up roller (tray 2)

A. Periodically replaced parts/cycle
• Feed roller: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints)
• Pick-up roller: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints)
B. Procedure
[4]
[1]
[1]
50gaf2c120na
[3]
[2]
50gaf2c121na
1.
Remove the bypass unit.
(See P.60)
2.
Pull out the tray 2 [1].
3.
Push the lever [1] to open the vertical conveyance
door [2].
4. Detach the fulcrum [3] of the vertical conveyance
door from the mounting plate [4] and remove the
vertical conveyance door.
3. PERIODIC CHECK
51