Konica Minolta bizhub 500 Service Manual page 335

1. SYSTEM CONFIGURATION
B. Configuration for optional device connection
Note
• Any combination other than those listed below is not available.
No. Combinations for paper feeding
1 DK-501/PC-202/PC-402 *1
2 DK-501/PC-202/PC-402 *1
3 DK-501/PC-202/PC-402 *1
4 DK-501/PC-202/PC-402 *1
5 DK-501/PC-202/PC-402 *1
6 DK-501/PC-202/PC-402 *1
7 PC-202/PC-402 *4
8 PC-202/PC-402 *4
9 PC-202/PC-402 *4
10 PC-202/PC-402 *4
11 PC-202/PC-402 *4
12 PC-202/PC-402 *4
*1 Either one of DK-501, PC-202 and PC-402 can be selected.
*2 FS-510 can be installed optionally with OT-601.
*3 FS-510 can be installed optionally with PU-501.
*4 Either one of PC-202 and PC-402 can be selected.
2
Combinations for finishing
OT-501
OT-501
RU-502 + FS-511
FS-510 *2*3
FS-510 *2*3
FS-510 *2*3
LU-201 OT-501
LU-201 OT-501
LU-201 RU-502 + FS-511
LU-201 FS-510 *2*3
LU-201 FS-510 *2*3
LU-201 FS-510 *2*3
Field Service Ver1.0 Feb.2006
Remarks
JS-502
SD-502
MT-501
JS-502
SD-502
MT-501