Product Specifications - Konica Minolta bizhub 500 Service Manual

1. PRODUCT SPECIFICATIONS

D. Paper feed prohibited originals
• If fed, trouble occurrence will be highly possible.
Type of Original
Original that is stapled or clipped.
Book original
Original weighing less than 35g/m
or more
Torn original
Highly curled original (15 mm or more)
OHP transparencies
Label Sheet
Offset master
Sheets clipped or notched
Sheets patched
E. Paper feed not guaranteed originals
• If fed, paper feed will be possible to some extent but trouble occurrence will be possible.
Type of Original
Sheets lightly curled
(Curled amount: 10 - 15 mm)
Heat Sensitive Paper
Coated Paper (Ink Jet Paper)
Translucent paper
Paper immediately after paper exit from the
main unit
Paper with many punched holes (e.g., loose
leaf) limited to vertical feeding
Sheets with 2 to 4 holes
Sheets two-folded or Z-folded
(amount of non-flatness: 15 mm or less)
Sheets folded
2
Feed failure, damage to the original, or drive failure
due to clip clogging
Feed failure, damage to the original, or drive failure
2 2
or 128g/m
Feed failure
Feed failure, damaged sheet
Original misfeed due to dog-ear or skew
Feed failure
Feed failure
Feed failure
Damaged sheet
Patched part folded or torn sheet
Dog-eared, exit failure
Edge folded, exit failure, conveyance failure
Take-up failure, conveyance failure
Take-up failure, conveyance failure
Take-up failure, conveyance failure
Multi-page feed due to flashes from holes
Conveyance failure
Take-up failure, conveyance failure, image deformation
Image deformation, multi-page feed, take-up failure
Field Service Ver. 1.0 Feb. 2006
Possible Trouble
Possible Trouble