Konica Minolta bizhub 500 Service Manual page 585

10. SERVICE MODE
*18 FS-510 paper exit tray position
Set the stop position of the paper exit tray.
*19 Fusing temperature setting while in the selection
of plain paper
When there occurs a problem (insufficient fusing,
large paper curl) with fusibility while in the selection of
plain paper, change the fusing set temperature.
• Countermeasure
1) Increase the temperature: To suppress a jam
due to an insufficient fusing and the wind-up of
paper around the roller.
2) Decrease the temperature: To suppress a
paper curl and the undulation of paper.
*20 Fusing temperature setting while in the selection
of thick paper, envelope, label.
When there occurs a problem (insufficient fusing) with
fusibility while in the selection of thick paper, envelope
and label, change the fusing set temperature. (For
countermeasure, see *19.)
*21 Fusing temperature setting while in the selection
of thin paper
When there occurs a problem (insufficient fusing) with
fusibility while in the selection of thin paper, change
the fusing set temperature. (For countermeasure, see
*19.)
*22 Fusing temperature setting while in the selection
of OHP
When there occurs a problem (insufficient fusibility
and large paper curl) with fusibility while in the selec-
tion of OHP, change the fusing set temperature. (For
countermeasure, see *19.)
252
Field Service Ver1.0 Feb.2006
Mode
Not fixed
Tray 1
Tray 2
Tray 3
Folding/stitch-and-fold
tray (SD)
Not fixed
Mode
Standard
Standard + 10 °C
Standard + 5 °C
Standard – 10 °C
Mode
Standard
Standard + 10 °C
Mode
Standard
Standard + 10 °C
Mode
Standard
Standard + 10 °C
Standard – 20 °C
Standard – 10 °C
34-3 34-2 34-1
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
36-3 36-2
0 0
0 1
1 0
1 1
36-4
0
1
36-5
0
1
36-7 36-6
0 0
0 1
1 0
1 1