Konica Minolta bizhub 500 Service Manual page 398

Field Service Ver1.0 Feb.2006
[3] [5]
[2]
[3]
[2]
[2] [1]
50gaf2c007na
[4] [1]
50gaf2c008na
[1]
50gaf2c009na
5.
Remove the 2 screws [1] and then remove the
separation roller fixing plate assy [2].
6.
Detach the support axis [2] of the holder [1] from
the mounting plate [3] and remove the holder.
Note
• When removing the holder [1], the spring [4]
provided under the holder is apt to come off.
Be careful that it does not get lost.
• When installing the holder [1], be sure to
install it so that it comes under the projection
[5].
7. Remove the C-ring [1] and then remove the sepa-
ration roller assy [3] from the holder [2].
8.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
65