Operating The Projector; Projector Power Modes; System Operation For Cp4440-Rgb And Cp4450-Rgb Projectors - Christie CineLife+ CP4415-RGB User Manual

Operating the projector

Learn how to operate the projector and adjust projector settings.

Projector power modes

The CineLife+ projectors track laser operation hours for the laser optical sub-systems (LOS).
The projector operates with the following power modes:
Mode
Standby
Projector on
Light source on
System operation for CP4440-RGB and CP4450-
RGB projectors
Understand the correct sequence for powering up and operating CP4440-RGB and CP4450-RGB
systems.
The connected chiller must always be turned on first and turned off only after the projector is turned
off. Once the chiller is connected to AC and the chiller communication cable is connected to the
projector, the projector controls the chiller automatically to maintain the required coolant temperature.
The system is ready to operate when the following steps are completed:
1. The connected chiller unit is powered on.
2. The projector's main power switches are ON.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-RGB
020-103073-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Description
• CineLife+ electronics remain on standby with the light engine off
• Fans, laser optical sub-systems (LOS), and thermo-electric cooler (TEC) devices
are off
• IMB is off (IMB automation does not function)
• CineLife+ electronics and light engine are on
• LOS and TEC devices are off
• Chiller is on (CP4440-RGB and CP4450-RGB projectors only)
• IMB is on
• CineLife+ electronics and light engine are on
• LOS and TEC devices are on
• Fans run at full speed
• Chiller is on (CP4440-RGB and CP4450-RGB projectors only)
• IMB is on
20