Connect A Twisted-Pair Ethernet Cable; Connect A Twisted-Pair Ethernet (Tpe) Cable - Sun Microsystems Fire V490 Setup And Rackmounting Manual

Connect a Twisted-Pair Ethernet Cable

Connect the twisted-pair Ethernet (TPE) cable to one of the Ethernet ports on
the back panel. Each network interface configures itself automatically for
either 10-Mbps, 100-Mbps, or 1000-Mbps operation depending on network
characteristics.
1. Choose a network port, using the following table as a guide.
Ethernet Port
1
0
Select the correct TPE connector for the interface you are installing. The server comes
with two TPE connectors on the back panel and one on the system controller card.
Your server may also include one or more TPE connectors provided via PCI Ethernet
interface cards.
44 Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
PCI Bus/Clock Rate
PCI C/66 MHz
PCI D/33 MHz
OBP
Devalias Device Path
net1 /pci@9, 600000/network@1
net0 /pci@9, 700000/network@2