EDAN elite V5 User Manual page 70

Patient Monitor User Manual
Message
ECG Signal
Exceeded
ECG Noise
ECG Comm Fail
RESP
RESP Comm Fail
RESP Noise
RR Exceed
Cause
ECG measuring signal is
beyond measuring range.
ECG measuring signal is
greatly interrupted.
ECG module failure or
communication failure
RESP module failure or
communication failure
RR cannot be measured due
to patient movement.
RR measuring value is out
of the measure range.
Alarm Level
Low
Low
High
High
Low
Medium
- 55 -
Alarm Information
Action Taken
Check lead
connection and
patient condition
Stop measuring
function of ECG
module, and notify
biomedical engineer
or manufacturer's
service staff.
Stop measuring
function of RESP
module, and notify
biomedical engineer
or the
manufacturer's
service staff.
Check whether the
RESP leads are well
connected. Keep the
patient calm for
better monitoring.
Check whether
interference to the
respiratory signal
exists. And check
whether the patient
is breathing
normally; breathing
too rapidly or too
slowly may
endanger patient's
life.