EDAN elite V5 User Manual page 43

Patient Monitor User Manual
Overview of XM Module
1
4
5
6
1 Setup key: press to enter the XM module setup menu.
2 Zero key: press to enter the zero IBP menu
3 NIBP start/ stop key: press to start or stop NIBP measurement.
4 Indicator
On: when the module works normally.
Flash: when the module is being initialized or malfunctioning.
Off: when the module is unconnected.
5 Module name
6 Connectors for transducer/sensor
7 Snap-fix
8 Connector to the monitor
Installing the XM Module
Mate the snap-fixes on the right side of the module with the slots on the rear of the monitor, and
push the module forwards until the lever clicks in place, then fasten the module with the snap-fix
on the left side of the monitor.
2 3
7
- 28 -
Basic Operation
8