EDAN elite V5 User Manual page 79

Patient Monitor User Manual
Message
CO Occlude
2
BIS
BIS Comm Fail
BIS Sensor
Connected
BIS Sensor Type
Error
BIS Sensor Usage >
24hrs
BIS Sensor Error
BIS Sensor Invalid
Cause
Water trap of SideStream is
occluded.
1) Disconnection between
the V-BIS module and BISx
device.
2) BISx device
operating.
1) The sensor
Not
properly connected.
2) PIC is not properly
connected.
1) Wrong sensor type.
2) Use the
neonatal patients.
The sensor was attached to
the monitor for more than
24 hours.
Sensor
including sensor
current, sensor
element (positive
negative) failure.
1) The BIS sensor is invalid
or not supported by the
BISx device.
2) The sensor
properly connected
Alarm Level
High
High
stops
is not
Low
Low
sensor on
Low
malfunction
over
ground Low
and
Low
is not
- 64 -
Alarm Information
Action Taken
Make sure the gas
exhaust works well
Properly connect
cables and well
connect the module.
Reconnect the
sensor or PIC.
Replace the sensor.
Replace the sensor.
Examine sensor
connection or
replace the sensor.
And then click
Continue in the
BIS Sensor Fault
window which
appears on the
screen or reconnect
the V-BIS module.
1) Replace the
sensor.
2) Connect the
sensor properly.