EDAN elite V5 User Manual page 36

Patient Monitor User Manual
1 Power
latch
2 AC power input
3 Equipotential
grounding terminal
4 RS232 interface
5 USB interfaces
6 Nurse call port/ analog
output/
synchronization
7 VGA output
8 PAM connector
9 Network interface
10 Extended
interface
11 Anti-thief lock
cable safety
defibrillator
video
Used to prevent the power cable from loosing
or falling. Place the latch on the power cable
and press it down firmly to ensure that it
secures the power cable.
If the monitor is used together with other
devices, connect this terminal to eliminate
potential ground differences between devices.
Connect it to communicate with other devices.
They support USB1.0/2.0 output.
Nurse call port: it connects the monitor to the
hospital's nurse
indications are alerted through the nurse call
system if configured to do so.
Analog output: the monitor outputs the
waveform through the port.
Defibrillator synchronization: the monitor
outputs the defibrillator synchronization signal
through the port.
It enables the VGA video output.
It connects the
Mainframe to the monitor.
It connects the monitor to the central
monitoring system (MFM-CMS) or gateway
via standard network cable, which enables
MFM-CMS or
bidirectional communication with the monitor.
It connects a secondary display, which extends
the display capability of your monitor.
- 21 -
Basic Operation
call system. Alarms
Parameter Amplifier
gateway to achieve