EDAN elite V5 User Manual page 21

Patient monitor
Table of Contents

Advertisement

Patient Monitor User Manual
4
The device and reusable accessories may be sent back to the manufacturer for
recycling or proper disposal after their useful lives.
5
Disposable devices are intended for single use only. They should not be reused as
performance could degrade or contamination could occur.
6
Remove a battery whose life cycle has expired from the monitor immediately.
7
Avoid liquid splashing on the device.
8
To ensure patient safety, use only parts and accessories manufactured or
recommended by EDAN.
9
Before connecting the monitor to the AC power, make sure the voltage and the power
frequency are consistent with the requirements indicated on the device label or in this
user manual.
10
Protect the device against mechanical damage resulting from falls, impacts, and
vibration.
11
A ventilated environment is required for monitor installation. Do not block up the
ventilation grille at the back of the device.
12
The monitors are MR Unsafe. The monitors are not intended for use in an MRI
environment.
13
Do not touch the touch screen with a sharp object.
14
Poor connection might be caused by frequently plugging and unplugging the power
cord. Check the power cord regularly and replace it in time.
15
In normal use, the operator shall stand in front of the monitor.
NOTE:
1
Position the device in a location where the operator can easily see the screen and
access the operating controls.
2
The monitor can only be used on one patient at a time.
3
If the monitor gets damp or liquid pours on the monitor, please contact the service
personnel of EDAN.
4
This monitor is not a device for treatment purposes.
5
The pictures and interfaces in this manual are for reference only.
6
Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
7
To protect eyes from damage, don't look directly at supplementary light for long time.
8
When there's measurement beyond range, invalid measurement or no measurement
value, it will display -?-.
9
The materials with which the patient or any other person can come into contact
conform to the standard of EN ISO 10993-1: 2013.
CAUTION
- 6 -
Intended Use and Safety Guidance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite v6Elite v8

Table of Contents