OnRobot VGC10 User Manual page 133

Additional Software Options
Configuration menu
Network settings:
The MAC address is a world-wide unique identifier that is fixed for the device.
The Network mode drop-down menu can be used to decide if the Compute Box will have a static or a
dynamic IP address:
• If it is set to Dynamic IP, the Compute Box expects an IP address from a DHCP server. If the network
that the device is connected to has no DHCP server, then the fixed 192.168.1.1 IP is used for the
device (after 60 seconds of timeout).
• If it is set to Static IP, then a fixed IP address and subnet mask must be set.
• If it is set to Default Static IP, the fixed IP revert to the factory default and cannot be changed.
After all parameters are set, click on the Save button to store the new values permanently. Wait 1 minute
and reconnect to the device using the new settings.
133