To Check The Device Driver - Keysight E5052B Service Manual

Troubleshooting
Function Specific Troubleshooting
Table 4-2 Major functions and troubleshooting procedures
Function
Oven
USB (USBTMC)
Interface

To Check the Device Driver

Make sure first whether the E5052B device drivers are installed properly or not by the
following procedure, if a function of specific device in the E5052B doesn't work.
Step 1. Exit from the E5052B measurement view in accordance with the procedure described in
"How to exit from the E5052B Measurement View" on page
screen is displayed.
Step 2. Right-click "My Computer" and select "Properties" as shown in
System Properties
Figure 4-15 Opening System Property Window
70
Description
A 10 MHz high stability signal is outputted.
The GPIB compatibility allows the E5052B to be
operated as a talker/listener on IEEE 488 interface
bus.
(Figure 4-16) will appear.
e5052bse1012
Troubleshooting
Refer to in "To Check the
Oven Ch1" on page 75 or
"To Check the Oven Ch2" on
page 76.
Refer to in "To Check the
USB (USBTMC) Interface
Card" on page 77.
55. Then, Windows desktop
Figure 4-15. Then, the
Chapter 4