A27 Removable Hard Disk Assembly Removal; Tools Required; Removal Procedure - Keysight E5052B Service Manual

Replacement Procedure

A27 Removable Hard Disk Assembly Removal

A27 Removable Hard Disk Assembly Removal

Tools Required

• TORX screwdriver T10, T15 and T20

Removal Procedure

Refer to Figure 6-3
Step 1. Remove the outer cover as described in
Step 2. Release the clamped cable form the clamp (item 1) on the bracket HDD.
Step 3. Remove the two TORX T10 screws (item 2, 3) fastening the bracket HDD.
Step 4. Release the cables from the removable hard disk assembly (item 4).
Step 5. Lift the removable hard disk assembly.
Step 6. Remove the four TORX T10 screws (item 5) fastening the bracket HDD.
140
for this procedure.
"Outer Cover Removal" on page 136.
Chapter 6