Phase Noise Bw Adjustment; Fll Bw Adjustment - Keysight E5052B Service Manual

Phase Noise BW Adjustment

The purpose of this procedure is to adjust the phase noise BW of the phase detector board.
Required equipment for the phase noise BW adjustment
Description
Signal Generator
N(m)-N(m) Cable

FLL BW Adjustment

The purpose of this procedure is to adjust the frequency lock loop BW of the phase detector
board.
Required equipment for the FLL BW adjustment
Description
Signal Generator
N(m)-N(m) Cable
Chapter 3
Required Adjustment after Replacing Assembly
Recommended Model
Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
Keysight N6314A (p/n 8120-8862)
Recommended Model
Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
Keysight N6314A (p/n 8120-8862)
Adjustment
51