YASKAWA P1000 Technical Manual page 274

B.12 S: Special Application
No.
(Addr. Name
Hex)
T1-07
Motor Base Speed
(0707)
T1-11
Motor Iron Loss
(070B)
<1> The availability of certain Auto-Tuning methods depends on the control mode selected for the drive.
<2> Default setting is dependent on parameter o2-04, Drive Model Selection.
<3> Values shown are specific to 208 V bypass drives. Double the value for 480 V bypass drives..
<4> Default setting value differs depending on the motor code value and motor parameter settings.
274
Sets the rated speed of the motor as specified on the motor nameplate.
Sets the iron loss for determining the Energy Saving coefficient.
The value is set to E2-10 (motor iron loss) set when the power is cycled. If
T1-02 is changed, a default value appropriate for the motor capacity that was
entered will appear.
YASKAWA SIEP YAIP1B 01B YASKAWA AC Drive – P1000 Bypass Technical Manual
Description Values Page
Default: 1750 r/min
Min.: 0 80
Max.: 14400
<4>
Default: 14 W
80
Min.: 0
Max.: 65535