Skew Adjustment - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Skew Adjustment

Phaser 7500 Printer Service Manual

1. Remove the Registration Transport Assembly (REP 15.2,

2. Remove the 2 screws that secure the Skew Adjusting Block to the Registration

Assembly (PL15.2.14).

3. Remove the Skew Adjusting Block.

4. Turn the Skew Adjusting Block a small amount clockwise and reinstall it on the

Registration Assembly. Verify that it moves up and down a small amount.

5. Re-install the screws removed in step 2 through the elongated slots in the

Skew Adjusting Block into their original holes in the Registration Assembly.

Adjustments and Calibrations