Xerox Phaser 7500 Service Manual page 904

Plug/Jack and Wiring Diagrams
10-4
Print Engine Plug/Jack Designators (Continued)
P/J Map Coordinates Remarks
125 1 G-108
126 1 F-108
127 1 E-108
130 9 F-183
144 7 G-153
150 1 D-112
151 1 A-114
153 1 B-113
154 1 E-112
160 11 H-213
161 11 I-213
172 10 G-203
173 10 F-203
174 8 F-169
177 10 F-195
178 10 G-195
179 10 G-202
180 11 E-214
Connection between the ATC Sensor Assy (M)
(PL5.2.4) and the ATC PWB (PL5.2.18)
Connection between the ATC Sensor Assy (C)
(PL5.2.4) and the ATC PWB (PL5.2.18)
Connection between the ATC Sensor Assy (K)
(PL5.2.4) and the ATC PWB (PL5.2.18)
Connection between the NOHAD Thermistor Assy
(PL5.2.11) and the Wire Harness (Main RH)
(PL18.4.3)
Connection between the 1st BTR Contact Retract
Sensor (PL3.2.17) and the Wire Harness (Main RH)
(PL18.4.3)
Internal connection of the MOB ADC Assy
(PL18.1.4) (MOB Sensor In)
Internal connection of the MOB ADC Assy
(PL18.1.4) (MOB Sensor Out)
Internal connection of the MOB ADC Assy
(PL18.1.4) (ADC Sensor Assy)
Internal connection of the MOB ADC Assy
(PL18.1.4) (Environment Sensor)
Connection between the Regi Sensor (PL15.2.10)
and the Wire Harness (Reg) (PL15.2.13)
Connection between the Transparency Sensor
(PL15.2.7) and the Wire Harness (Reg) (PL15.2.13)
Connection between the MPT No Paper Sensor
(PL13.4.17) and the Wire Harness (MSI)
(PL13.4.2)
Connection between the MPT Paper Size Sensor
(PL13.5.4) and the Wire Harness (MSI Tray)
(PL13.5.9)
Connection between the Tray 1 Paper Size Sensor
(PL9.1.6) and the Wire Harness (Main RH)
(PL18.4.3)
Connection between the Tray 1 Nudger Level
Sensor (PL9.4.6) and the Wire Harness (Feeder)
(PL9.4.20)
Connection between the Tray 1 No Paper Sensor
(PL9.4.6) and the Wire Harness (Feeder)
(PL9.4.20)
Connection between the MPT Feed Out Sensor
(PL13.4.16) and the Wire Harness (MSI)
(PL13.4.2)
Connection between the POB Sensor (PL14.4.16)
and the Wire Harness (LH Cover) (PL14.4.17)
Phaser 7500 Printer Service Manual