Transfer Blank Areas (Partially Moist Paper) - Xerox Phaser 7500 Service Manual

Print-Quality Troubleshooting
IQ-27 Transfer Blank Areas (Partially Moist Paper)
Cause
Initial Actions
5-56
Ripples in partially moist paper becomes wrinkles in the Transfer section, causing
blank areas to appear.
• This occurs with paper that has uneven moisture content.
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference
Applicable Parts
Fuser Assy, PL7.1.1
■
Troubleshooting Procedure
Step Actions and Questions
1 Replace the paper with freshly
unpacked paper from the RML.
Does the problem go away?
Example Print
Yes
Troubleshooting
complete.
Phaser 7500 Printer Service Manual
Transfer Blank Areas
No
Replace the
Fuser Assembly
(REP 7.1,
page 8-67).