Xerox Phaser 7500 Service Manual page 631

Hide thumbs Also See for Phaser 7500:

Table of Contents

Phaser 7500 Printer Service Manual

6. Disconnect the wiring harness connector that are connected to the Erase

Lamp Unit (K).

7. Remove 2 screws (silver, 6mm) that secure the Erase Lamp Unit (K) and

remove the Erase Lamp Unit (K).

Replacement Note

Be sure to align the rear of the Erase Lamp Unit with the pin. Slightly move the

Erase Lamp Unit left and right to sit the pin unit in place.

Service Parts Disassembly

Pin Locations

Troubleshooting