Rep 15.4 Transparency Sensor - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

REP 15.4 Transparency Sensor

1. Remove the Regi Transport Assembly (REP 15.2,

2. Disconnect the wiring harness connectors that are connected to the 2 sensors

and remove the harness from the Harness Guide.

3. Remove 2 screws (silver, Tapped, 8mm) that secure the Inlet Chute Assembly

and remove the Inlet Chute Assembly.

4. Remove the Sensor Holder.

5. Release the 4 hooks that secure the Transparency Sensor and remove the

Transparency Sensor.

Phaser 7500 Printer Service Manual