Iq-26 Color Stripes - Xerox Phaser 7500 Service Manual

IQ-26 Color Stripes

Phaser 7500 Printer Service Manual
Presence of paper dust in between the Intermediate Transfer Belt and the CLN
Blade causes poor cleaning.
Cause
• This occurs when a paper that is prone to flaking is used.
• This is likely to occur at high humidity.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference
Applicable Parts
IBT Belt Cleaner Assy, PL6.1.4
■
Troubleshooting Procedure
Step Actions and Questions
1 Remove the IBT Belt Cleaner Assembly
(page 8-57) to check if debris exist at
the tip of the Blade.
Print-Quality Troubleshooting
Example Print
Yes
Clean the
blade.
Color Stripes
No
Replace the
IBT Belt
Cleaner
Assembly
(REP 6.1,
page 8-57).
5-55