C Disp Motor Fail - Xerox Phaser 7500 Service Manual

Error Messages and Codes

C Disp Motor Fail

Applicable Chain-Link Code
Initial Actions
3-284
The Cyan Toner Cartridge empty was detected empty regardless of low usage of
toner from Cyan Toner Cartridge.
• 093-316: C Disp Motor Fail
• Power cycle the printer.
• If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
Toner Cartridge (C), PL5.1.2
■
MCU PWB, PL18.3.6
■
1. Turn the power Off and On.
2. Examine the toner feed system for clumped toner.
3. Replace the Toner Cartridge (C) (REP 1.1,
4. Perform the Dispenser Motors test in Diagnostics.
5. Check the drive transmission path in the Dispense Assembly. If no problems
are found, replace the MCU PWB (REP 18.12,
Wiring and Plug/Jack Map References
page 8-9).
page 8-202).
Phaser 7500 Printer Service Manual