Rep 11.19 Tray Module (1T) (500-Sheet Feeder) - Xerox Phaser 7500 Service Manual

REP 11.19 Tray Module (1T) (500-Sheet Feeder)

PL11.1.4
Phaser 7500 Printer Service Manual
Warning
The printer is heavy and must be lifted by three people. Use safety lifting and
handling techniques when moving the printer (refer to
page xxvii).
1. Remove the Tray Assembly from the printer.
2. Release the clamp and remove the harness.
3. Disconnect the wiring harness connector that connects the Tray Module (1T)
to the printer.
4. Remove the Docking Screw of the Docking Bracket at the rear that connect
the Tray Module (1T) to the printer.
5. Remove 2 Docking Screws at the front that connect the Tray Module (1T) to
the printer, lift up the printer and remove the Tray Module (1T).
Service Parts Disassembly
"Moving the Printer" on
s7500-190
8-129